Menu
The intelligent isolated transmitter TRH is a programmable 2-wire HART device with 2000 V input/output isolation level. It is available in case prepared for mounting in 33 mm sensor heads, plastic protection box, and different Ex housings. The transmitter allows the user to program various input and output features including input signal type and range, output offset and calibration, reaction at sensor failure, fixed output current, digital filter, etc. TRH can be ordered with intrinsically safe option for Ex applications. The transmitter is easy to program via HART modem over the current loop using free configuration software “HartTemp”. Thanks to its large capabilities and low price, TRH can be very useful in various industrial field applications requiring signal isolation and HART communication.
| Монтаж | In box IP65, In head, In Ex housing |
|---|---|
| Аналогов вход | RTD Cu50 – 1.426, RTD Cu50 – 1.428, RTD Ni100, RTD Ni1000, RTD Ni500, RTD Pt100 – 1.385, RTD Pt100 – 1.391, RTD Pt500, Thermocouple (TC) B, Thermocouple (TC) E, Thermocouple (TC) J, Thermocouple (TC) K, Thermocouple (TC) N, Thermocouple (TC) R, Thermocouple (TC) S, Thermocouple (TC) T |
| Корпус | 80x80x60 mm, ø44×24 mm |
| Аналогов изход | 4…20 mA |
| Захранване | 7.5…45 VDC |
| Интерфейс | HART |
| Input (programmable) | ||
| Pt100; 3(4)-wire | min. -200…max. 850 °C | |
| Pt500 (Pt1000); 3(4)-wire (5) | min. -200…max. 250 °C | |
| Cu50 (Cu100); 3(4)-wire | min. -50…max. 150 °C | |
| Ni100; 3(4)-wire | min. -60…max. 180 °C | |
| Ni500 (Ni1000); 3(4)-wire (5) | min. -60…max. 180 (150) °C | |
| RTD minimum range width | 10 °C | |
| Thermocouple “T” | min. -270…max. 400 °C | |
| Thermocouple “E” | min. -270…max. 1000 °C | |
| Thermocouple “J” | min. -210…max. 1200 °C | |
| Thermocouple “K” | min. -270…max. 1372 °C | |
| Thermocouple “N” | min. -270…max. 1300 °C | |
| Thermocouple “S”(“R”) | min. -50…max. 1768 °C | |
| Thermocouple “B” | min. 0…max. 1820 °C | |
| T/C minimum range width | 50 °C (500 °C for noble T/C) | |
| Linear voltage [mV] | -10…75 mV, -100…100 mV (5) | |
| Linear voltage [V] | -0.5…0.5 V (5), -1…2 V (5) | |
| Minimum range [mV] | 5 mV (20 mV for 2 V range) | |
| Linear resistive | min. 0…max. 400(2000) Ω | |
| Minimum range [Ω] | 10 Ω (20 Ω for 2 k range) | |
| Input / output isolation | 2000 VAC for 1 min | |
| Output | ||
| Output range | 4…20 mA, 2-wire | |
| Linearly proportional to | measured value | |
| Resolution | 0,3 µA | |
| Response time | 1 s | |
| Switch-on delay | ≤ 5 s | |
| Digital filter | programmable | |
| Output calibration | configuration software | |
| Output manual control | 0…100% via configuration software | |
| Sensor failure reaction | ≤ 3,8 mA, ≥ 20,5 mA | |
| Accuracy | ||
| Measurement error | Pt500, Ni500 | 0.2 % from span |
| Pt1000, Ni1000, Cu100, 0…2 kΩ | 0.12 % from span | |
| other input types | 0.08 % from span | |
| Non-linearity | within measurement error | |
| Temperature drift | negligible | |
| Load and power supply influence | negligible | |
| Long-term stability | ≤ 0.05% from span per 1 year | |
| Cold junction compensation | internal, automatic | |
| Power supply | ||
| Supply voltage | 7,5…45 VDC | |
| Maximum line load | 750 Ω at 24V/20mA | |
| Interface | ||
| Communication | HART protocol over current loop | |
| Configuration software | HartTemp”, free | |
| Operating conditions | ||
| Ambient temperature | -40…85 °C | |
| Ambient humidity | 0…90 %RH | |
| Shocks and vibrations | 4g, 2…150 Hz, according to EN 60068 |
|
| Design and materials | ||
| Case material | PC plastic with epoxy potting | |
| Wiring | screw terminals | |
| Mounting | in head (1,2,3) | in box (2) |
| Dimensions | ø44×24 mm | 80x80x60 mm |
| Weight | ≈ 34 g | ≈ 170 g |
| Protection class | IP00 | IP65 |
(1) Head type “B” or any other with 33 mm distance between centers of the female threaded openings
(2) May be mounted on rail by a special snap-on accessory, which is ordered separately (see ‘Accessories’).
(3) May be mounted in different, separately ordered Ex housings for field applications (see ‘Accessories’).
Наименование на проекта: Решения в областта на информационните и комуникационни технологии и киберсигурността в малките и средните предприятия
Краен получател: Комеко АД
Обща стойност: 20 000 лв
Цел на проекта: Допринасяне за ускоряване на прехода към цифровизация на икономиката чрез предоставяне на безвъзмездни средства за внедряване на информационни и комуникационни технологии и решения, осигуряващи повишаване нивото на дигитализация на малките и средните предприятия
Етапи: Създаване на онлайн магазин, създаване на корпоративен уебсайт, изграждане на система за архивиране на информация
