Menu
The TC800 indicator is designed for multi-point control of technological variables. With its compact design, 8 inputs and outputs, TC800 successfully performs all the tasks of indicating, monitoring, and signaling the level of several channels. With the proper programming, any of the channels may be turned into a 2-or 3-state ON/OFF controller and even into a multistage controller. Motorized actuators may be controlled by using 2 relay outputs. The device input accepts thermoresistances, thermocouples, or standard current and voltage signals. Additional discrete inputs are available for remote channel switching and tampering protection. TC800 performs digital compensation for RTD sensor line resistance as well as thermocouple cold-junction compensation, and constantly monitors sensor and sensor-lead state. A rich set of parameters allows programming every aspect of controller operation and an RS485 serial interface allows network operation or connection to operator station.
| Захранване | 115 VAC, 230 VAC, 90…250 V |
|---|---|
| Релеен изход | Relay NO |
| Аналогов вход | 0…1 V DC linear voltage, 0…10 V DC linear voltage, 0…2 V DC linear voltage, 0…20mA DC linear current, 0…5 V DC linear voltage, 4…20mA DC linear current, Other, RTD Cu100 – 1.426, RTD Cu100 – 1.428, RTD Cu50 – 1.426, RTD Cu50 – 1.428, RTD Pt100 – 1.385, RTD Pt100 – 1.391, RTD Pt1000 – 1.385, RTD Pt50 – 1.385, RTD Pt50 – 1.391, RTD Pt500, Thermocouple (TC) B, Thermocouple (TC) E, Thermocouple (TC) J, Thermocouple (TC) K, Thermocouple (TC) L, Thermocouple (TC) L – GOST, Thermocouple (TC) R, Thermocouple (TC) S, Thermocouple (TC) T, Thermocouple (TC) U |
| Цифров вход | Contact, None, NPN, PNP, TTL |
| Интерфейс | None, RS485 |
| Протокол | ASCII, ASCII PolyMonitor, Binary, Binary PM |
| Аларми | None, System |
| Повишена лицева защита | IP65 |
| Корпус | 96x96x107 mm |
| Монтаж |
| Analog inputs (2…8 inputs) | |
| Pt10…1000 (w=1.385, 1.391) | -100(-200)…200(850) °C (1) |
| Cu50, Cu100 (w=1.426, 1.428) | -50(0)…200 °C (1) |
| Other RTD (1) | min. -200…max. 850 °C |
| Thermocouple “J” | 0…800 °C |
| Thermocouple “K” | 0…1200 °C |
| Thermocouple “S” | 0…1600 °C |
| Thermocouple “R” | 0…1600 °C |
| Thermocouple “B” | 200…1800 °C |
| Thermocouple “L” | 0…1200 °C |
| Thermocouple “L – GOST” | 0…600 °C |
| Thermocouple “E” | 0…1000 °C |
| Thermocouple “T” | 0…400 °C |
| Thermocouple “U” | 0…600 °C |
| Other thermocouple (1) | min. 0…max. 2400 °C |
| Linear voltage 0…1/ 2/ 5/ 10 V | -999…9999, programmable |
| Linear current 0(4)…20 mA | -999…9999, programmable |
| Custom linear voltage; max. 40 V (1) | min. -999…max. 9999, programmable |
| Custom linear current; max. 50 mA (1) | min. -999…max. 9999, programmable |
| Discrete inputs (up to 2 inputs) | |
| Input signal type | contact, TTL, NPN, or PNP |
| Input 1 function | remote channel selection |
| Input 2 function | ext. programmed parameter protection |
| Outputs (up to 9 relay outputs) (2) | |
| Relay electromechanical | 5A/250V w/ NO contact (3) |
| Solid state relay (SSR) (5) | 1A/250VAC |
| MOS gate (5) | 0.1A/60V, optically isolated |
| Output for external SSR | 5…24 V, 30 mA |
| Alarms | up to 16, programmable |
| System-failure alarm | activates SPDT EMR output No 9 |
| Serial interface | RS485, isolated (4) |
| Accuracy | |
| Measurement error | 0.4% from span |
| Temperature drift | 0.005% from span for 1 °C |
| Cold junction compensation | ± 1 °C, automatic software |
| RTD line compensation | software |
| Power supply | |
| Mains supply voltage | 230 VAC or 115 VAC |
| SMPS voltage | 90…250 V |
| Isolated low voltage | 12…24 V or 24 VAC |
| Consumption | max. 4 VA |
| Indication and controls | |
| Channel-number display | 2 green LED indicators, 14 mm |
| Measured-value display | 4 red LED indicators, 14 mm |
| LEDs | 8 LEDs for output state and 16 LEDs for alarm state |
| Keyboard | 8 membrane keys |
| Operating conditions | |
| Ambient temperature | -10…65 °C |
| Ambient humidity | 0…85 %RH |
| Design and materials | |
| Case material | plastic |
| Mounting | in 90×90 mm panel cut-out |
| Wiring | plug-in terminals |
| Dimensions | 96×96(front)x107 mm |
| Mounting depth | 98 mm |
| Weight | макс. 650 g |
| Protection, front/terminals | IP54 / IP20 |
| Increased front IP (option) | IP65 |
(1) Custom; specify range within the limits stated.
(2) Relay No 9 is for system-failure alarm only (G10)!
(3) NO/NC for relay No 1
(4) With ASCII protocol, the outputs may be controlled only through the interface, and with binary protocol – only through the hardware!
(5) Ask for availability!
Наименование на проекта: Решения в областта на информационните и комуникационни технологии и киберсигурността в малките и средните предприятия
Краен получател: Комеко АД
Обща стойност: 20 000 лв
Цел на проекта: Допринасяне за ускоряване на прехода към цифровизация на икономиката чрез предоставяне на безвъзмездни средства за внедряване на информационни и комуникационни технологии и решения, осигуряващи повишаване нивото на дигитализация на малките и средните предприятия
Етапи: Създаване на онлайн магазин, създаване на корпоративен уебсайт, изграждане на система за архивиране на информация
