Comeco logo

Advantages

  • Switching to the “zero” point
  • Output switch – double thyristor
  • Up to 400 VAC operating voltage
  • Up to 200 A switched current
  • 4 input ranges
  • 4000 V isolation between input and output

Description

The SSRT electronic relay is an electronic module with built-in power triac controlled at the “zero” point and is designed to switch single-phase AC active loads up to 200 Arms and inductive loads up to 95 Arms at voltages up to 400 VAC. Thanks to the high switching frequency and the complete absence of noise and electromagnetic radiation, the SSR module is a modern non-contact replacement for electromechanical relays and contactors. Its life and reliability are greater than those of electromechanical relays due to the absence of moving parts, vibration and contact wear. The control signal is optically separated from the output and can be constant or variable voltage, the presence of which is monitored by a special indicator.

SSRT solid state relay

Technical Specifications
Input
Control voltage4…36 VDC6…26 VAC/DC115 VAC230 VAC
Input current5…12 mA6…12 mA6 mA12 mA
Turn-on/off voltage3 VDC4 VAC / 5 VDC90 VAC180 VAC
Reverse voltage protection-32 VDC-32 VDC
Output
AC switching current at proper heatsink(1)≤ 200 Arms
Minimum holding current 200 mA
Non-rep. surge current at t = 10 ms1700 A
Maximum leakage current15 mA
Critical rate of current rise dI/dt 150 A/μs
I2t value for fusing at t = 10 ms1125 A2s
On-state voltage at rated current1,6 Vrms
Critical off-state voltage rise dV/dt 500 V/μs
Operational frequency45…65 Hz
Thermal resistance (junction-case)0,14 °C/W
General specifications
Operating AC voltage min. 24…max. 400 VACrms
Rep. off-state peak voltage1200 Vp
Non-rep. off-state peak voltage 1300 Vp
Power factor > 0,5
Operating temperature-20…65 °C
Storage temperature-40…85 °C
Standard heatsinkaluminum, 150 mm long
Input/output insulation4000 VACrms
Output/case insulation2500 VACrms
Protection classIP00
Input wiringscrew terminals
Output wiring3 x M5 screws
Mountingfor optimized cooling
Rail mounting MAC2 rail clamp (2)
ON-indicating LEDø3, red
Weightmax. 350 g (w/ standard heatsink)

(1) We highly recommend using SSR at no more than 80% of maximum on-state current!

(2) Ordered separately (see ‘Accessories’)