Comeco logo

Advantages

  • Switching to the “zero” point
  • Up to 275 VAC operating voltage
  • 10 A, 16 A, 25 A or 40 A switched current
  • 4 input ranges
  • 4000 V isolation between input and output
  • Possibility of equipping with a radiator

Description

The SSRP electronic relay is an electronic module with a built-in power triac controlled at the “zero” point and is designed to switch single-phase AC active or small inductive loads from 10 A to 40 A at voltages up to 275 VAC. Thanks to the high commutation frequency and the complete absence of noise and electromagnetic emissions, the SSR module is a modern contactless replacement for electromechanical relays and contactors. Its life and reliability are greater than those of electromechanical relays due to the absence of moving parts, vibration and contact wear. The control signal is optically separated from the output and can be constant or variable voltage, the presence of which is monitored by a special indicator.

SSRP solid state relay

Current / Voltage / Resistance

Technical Specifications
Input
Control voltage
4…36 VDC6…26 VAC/DC115 VAC230 VAC
Input current 5…12 mA6…12 mA6 mA12 mA
Turn-on / off voltage3 VDC4 VAC / 5 VDC90 VAC180 VAC
Reverse voltage protection-32 VDC-32 VDC
Output (no connection with the input types!)
On-state current at proper heatsink (1)≤ 10 Arms≤ 16 Arms≤ 25 Arms≤ 40 Arms
Minimum holding current 50 mA50 mA80 mA80 mA
Non-rep. surge current at t = 20 ms100 A160 A250 A400 A
Maximum leakage current 1 mA2 mA3 mA5 mA
Critical rate of current rise dI/dt 50 A/μs50 A/μs50 A/μs50 A/μs
I2t value for fusing at t = 10 ms78 A2s78 A2s78 A2s78 A2s
On-state voltage at rated current 1,6 Vrms1,6 Vrms1,6 Vrms1,6 Vrms
Critical off-state voltage rise dV/dt 400 V/μs400 V/μs500 V/μs500 V/μs
Operational frequency 45…65 Hz45…65 Hz45…65 Hz45…65 Hz
Thermal resistance (junction-case) 2,3 °C/W2,1 °C/W1,1 °C/W1,2 °C/W
General specifications
Operating AC voltagemin. 24…max. 275 VACrms
Rep. off-state peak voltage 600 Vp
Non-rep. off-state peak voltage 700 Vp
Power factor > 0,6
Operating temperature-20…65 °C
Storage temperature -40…85 °C
Case material glass-filled plastic
Base plate (heatsink) material aluminum
Input / output insulation4000 VACrms
Output / case insulation 2500 VACrms
Protection class IP00
Wiring4 x M4 screws
Mounting 2 x M4 screws
Rail mounting MAC2 rail clamp (2)
ON-indicating LED ø3, red
Weight≈ 100 g

(1) We highly recommend using SSR at no more than 80% of maximum on-state current!

(2) Ordered separately (see ‘Accessories’)