Menu
The specialized multi-point probe for measuring temperature in bulk materials and compost TSCOM consists of 5 Pt100(0) temperature sensors, which are evenly distributed over a measuring distance of 1 m, determining the temperature at 5 measuring points. Although stainless steel conducts heat, the special design is extremely robust and accurate and makes it possible to place this measuring device inside a stainless steel rod probe (insertion probe) so that each temperature sensor measures the temperature at only one point. The electronics are housed in a waterproof aluminum housing, which is screwed onto the insertion probe and includes: 5 transmitters, a pressure compression element and a connection coupling.
| Input |
|
| Built-in RTD | Pt100(0) (w=1.385) |
| Measuring range | 0…100 °C |
| Output | |
| Output type | 5 x 4…20 mA L(2) – wire; 5 х 0…10 V L(3) – wire; |
| Sensor Fault Output (short circuit/ interrupt) | Programmable >20.2 mA <3.8 mA |
| Working conditions | |
| Ambient temperature | -40…85 °C |
| Air pressure | 900 hPa – 1100hPa |
| Permissible humidity | From 20 to 100% relative humidity, non-condensing |
| Power supply | |
| Supply voltage | 24 VDC ± 5% , 7-pin connector (male (rear view) and female (front view)) |
| Accuracy | ± 2% |
| Reproducibility | ± 1% |
| Reaction time | About 5 minutes. |
| Construction | |
| Corps | Stainless steel DIN 1.4301 (AISI 304) |
| Protective box | G139G-IP67GAINTA 158x158x101mm |
| Degree (class) of protection of the housing | IP54 |
| Size (with handles) | about 320х100х80mm |
| A stick probe | Length 1150mm Diameter 23mm Stainless steel 1.4301 |
| Total weight (transmitter + probe) | 3.500 гр. |
| Sensor protection class | IP54 |
* set in mm according to the drawing for each position
